Do you understand the usage characteristics of the artificial lawn drawing machine equipment? In the introduction, some unknown issues or knowledge were introduced to everyone, but the industry where "Changzhou Fulin Machinery Co., Ltd." is located is still relatively unfamiliar to everyone. Today, let's take a look:
The artificial lawn wire drawing machine is widely used in the production and pre-processing of metal products such as steel wires, rope making wires, prestressed steel wires, and standard parts. The main function is to ensure that the diameter, roundness, internal metallographic structure, surface smoothness, and straightening of wire or bar meet the raw material processing requirements required for the production of standard metal products. The thickness is uniform, smooth, not easily broken, and the work efficiency is high with low energy consumption. We have summarized the following points for the usage characteristics of the artificial lawn drawing machine equipment.
1、Built in advanced PID algorithm, fast response, strong adaptability, and simple debugging; 16 speed control, simple PLC to achieve multifunctional logic control such as timing, fixed speed, and orientation, with multiple flexible control methods to meet various complex working conditions, is an advanced production equipment.
2、Adopting the latest high-speed motor control dedicated chip DSP, ensuring fast response of vector control, wide voltage input, automatic voltage stabilization (AVR) of output voltage, instant power failure without stopping, and stronger adaptability.
3、Built in international standard MODBUS RTU ASCII communication protocol, users can achieve centralized control of frequency converter 485 communication network through PC/PLC control of upper computer, etc. No PG vector control, PG vector control, torque control, V/F control can be selected. The structure adopts an independent air duct design, and the fan can be freely disassembled, with good heat dissipation.
The electrical transmission part of the artificial lawn drawing machine equipment consists of a traction motor, a wire winding motor, and a wire laying motor. The auxiliary part consists of a swing rod (tension frame), a positioning wheel, a dividing wheel, a reciprocating cable rod, and so on. When the equipment is running, it should be noted that synchronization is required during parking to avoid wire breakage or tension relaxation; Do you know the usage characteristics of artificial turf and artificial turf drawing machine equipment when parking? For heavy full discs, brake in the opposite direction to prevent wire breakage caused by inertia.
Related article recommendations:
The finished product produced by the artificial lawn wire drawing machine has a uniform and smooth thickness, is not easy to break, and the equipment has high work efficiency and low energy consumption, making it one of the important equipment worthy of strong recommendation. The characteristics of the artificial lawn wire drawing machine include the use of independent air duct design in the structure, the fan can be freely disassembled, and good heat dissipation. Adopting the latest high-speed motor control dedicated chip DSP, ensuring fast response of vector control. The safe operation of the artificial lawn drawing machine should be taken seriously.
Install the wire drawing sand belt correctly (the direction of the arrow on the inner side of the wire drawing sand belt should be consistent with the direction of the arrow on the wire drawing roller). Carefully check whether the lubrication of the upper and lower bearing seats and the lifting screw is good, and only start the machine when there is no one on the front side of the discharge. The pressure adjustment should be moderate, and the pressure gauge reading should generally be between 35 and 75. It is strictly prohibited to exceed the red line to avoid equipment or personal accidents.
If any abnormal phenomenon occurs during the operation of the equipment, it should be immediately shut down or powered off to prevent the fault from expanding. It is strictly prohibited to adjust the air pressure of the equipment during normal operation to avoid equipment and personal accidents caused by the sand belt losing control. During equipment maintenance, the main power should be turned off and signs indicating that operation is strictly prohibited to avoid accidents.
It is strictly prohibited to place workpieces directly on the conveyor belt for wire drawing without using pallets. It is also strictly prohibited to place workpieces on wooden pallets without blocking bars for wire drawing, in order to avoid damaging the conveyor belt and injuring people by flying workpieces. It is strictly prohibited to start both the wire drawing machine and the dust collection fan at the same time, and it is strictly prohibited for operators to leave their work positions after starting. After starting the equipment, it is necessary to immediately check whether the sand belt swing is within the required range and whether there are any other abnormal phenomena. Otherwise, it should be adjusted or shut down immediately.
The entire process of the artificial lawn wire drawing machine should be operated with gloves, pay attention to the surface protection of the workpiece, and strictly prevent scratches and collisions on the surface of the workpiece, resulting in waste. At the same time, it is also important to pay attention to the safety of the artificial lawn drawing machine when drawing finished workpieces. It is important to handle with care and carry out layered protective packaging to avoid surface damage to the workpieces.
“Do you understand the usage characteristics of the artificial lawn drawing machine equipment?” The content described was carefully prepared by our editor for everyone. Do you remember what was mentioned in the previous article? These may all have some incomplete aspects, and we will explain them one by one in future articles