Changzhou Fulin Machinery Co., LTD provides you with free Round wire machine,single wire machine,wire drawing machine and other related information release and information display, please pay attention!
Your current location : 首页 > News information > 【图文】Changzhou Fulin Machinery Factory teaches you how to use a monofilament machine correctly

新闻资讯 News

联系我们 Contact Us

Changzhou Fulin Machinery Co., LTD



COMPANY ADDRESS:Xinbei District Xuejia town Caohe Road No. 10

【图文】Changzhou Fulin Machinery Factory teaches you how to use a monofilament machine correctly

time:2022-4-9 22:32:00

  If used correctly, a monofilament machine can help maintain its performance and lifespan. Today, Changzhou Fulin Machinery Factory will tell you the correct usage method of the monofilament machine.

  1、According to the production task list and process requirements, measure whether the wire diameter meets the requirements, check the surface quality, whether there is oxidation, burrs, scratches, and other phenomena. If there is oil or dust on the surface of the wire, it should be wiped clean before getting on the car for rewinding. The reel cannot be filled too full, Φ 400~ Φ The distance between the installation distance of the 630 take-up reel and the edges of both sides of the board should be between 10mm and 30mm.

  2、No items are allowed to be placed on the control console or device. Operators must have a strong sense of work responsibility, consciously abide by process discipline and operating procedures, and use and maintain equipment correctly.

  3、Adhere to the handover system and carefully fill in the operation status of the equipment on duty. The operator should be familiar with the performance and structure of the equipment, and achieve "three excellences" and "four skills". When the operator hands over to and from work, they must wipe the equipment and clean the workplace.

  Let's introduce the characteristics of the monofilament machine again:

  1、Adopting a mixed high-strength alloy steel screw, it has the advantages of good plasticization performance, uniform extrusion amount, corrosion resistance, and wear resistance.

  2、Novel die structure, convenient replacement of filter screen, and uniform size of spray plate and spray wire made of heat-resistant alloy.

  3、The five roll traction machine is equipped with a linkage device to achieve synchronous speed adjustment.

  4、The cold and hot water tanks are made of stainless steel plates and will never rust.

  5、Horizontal winding is achieved by a torque motor for single wire winding. Adopting hydraulic wire arrangement, stable winding with low noise, energy-saving, and good reliability.